Name
- Ssh Agents Login
- Ssh Agent Jenkins
- Ssh Agents Near Me
- Ssh Agents
- Ssh Agent List Keys
- Ssh Agent Add Key
- What Is Openssh Authentication Agent
Is the premier network analysis tool because it provides power and simplicity in one interface. My other tutorials. This tutorial will show you how to isolate traffic in various ways—from IP, to port, to protocol, to application-layer traffic—to help you find what you need as quickly as possible. The SSH Daemon enables the Add Host Targets Wizard to establish SSH connectivity between the OMS host and the host on which you want to install a Management Agent. Using this connectivity, the wizard transfers the Management Agent software binaries to the destination host over SSH protocol, installs the Management Agent, and configures it.
ssh_config - OpenSSH SSH client configuration files
Synopsis
~/.ssh/config
/etc/ssh/ssh_config
- The ssh-agent is a helper program that keeps track of user's identity keys and their passphrases. The agent can then use the keys to log into other servers without having the user type in a password or passphrase again. This implements a form of single sign-on (SSO). The SSH agent is used for SSH public key authentication.
- We would like to show you a description here but the site won’t allow us.
- Start the ssh-agent in the background. $ eval '$(ssh-agent -s)' Agent pid 59566; If you're using macOS Sierra 10.12.2 or later, you will need to modify your /.ssh/config file to automatically load keys into the ssh-agent and store passphrases in your keychain. First, check to see if your /.ssh/config file exists in the default location. $ open /.ssh/config The file /Users/you/.ssh.
Description
ssh(1) obtains configuration data from the following sources in the following order:
2. user's configuration file (~/.ssh/config)3. system-wide configuration file (/etc/ssh/ssh_config)
For each parameter, the first obtained value will be used. The configuration files contain sections separated by 'Host' specifications, and that sectionis only applied for hosts that match one of the patterns given in the specification. The matched host name is the one given on the command line.
Since the first obtained value for each parameter is used, more host-specific declarations should be given near the beginning of the file, and generaldefaults at the end.
The configuration file has the following format:
Empty lines and lines starting with '#' are comments. Otherwise a line is of the format 'keyword arguments'. Configuration options may be separated bywhitespace or optional whitespace and exactly one '='; the latter format is useful to avoid the need to quote whitespace when specifying configuration optionsusing the ssh, scp, and sftp -o option. Arguments may optionally be enclosed in double quotes (') in order to represent argumentscontaining spaces.
The possible keywords and their meanings are as follows (note that keywords are case-insensitive and arguments are case-sensitive):
Host' Restricts the following declarations (up to the next Host keyword) to be only for those hosts that match one of the patterns given afterthe keyword. If more than one pattern is provided, they should be separated by whitespace. A single '*' as a pattern can be used to provide global defaults forall hosts. The host is the hostname argument given on the command line (i.e. the name is not converted to a canonicalized host name before matching).
See PATTERNS for more information on patterns.
AddressFamily
Specifies which address family to use when connecting. Valid arguments are 'any', 'inet' (use IPv4 only), or 'inet6' (use IPv6 only).
BatchMode
If set to 'yes', passphrase/password querying will be disabled. This option is useful in scripts and other batch jobs where no user is present to supply thepassword. The argument must be 'yes' or 'no'. The default is 'no'.
BindAddress
Use the specified address on the local machine as the source address of the connection. Only useful on systems with more than one address. Note that thisoption does not work if UsePrivilegedPort is set to 'yes'.
ChallengeResponseAuthentication
Specifies whether to use challenge-response authentication. The argument to this keyword must be 'yes' or 'no'. The default is 'yes'.
CheckHostIP
If this flag is set to 'yes', ssh(1) will additionally check the host IP address in the known_hosts file. This allows ssh to detect if a host keychanged due to DNS spoofing. If the option is set to 'no', the check will not be executed. The default is 'yes'.
Cipher
Specifies the cipher to use for encrypting the session in protocol version 1. Currently, 'blowfish', '3des', and 'des' are supported. des is onlysupported in the ssh(1) client for interoperability with legacy protocol 1 implementations that do not support the 3des cipher. Its use is stronglydiscouraged due to cryptographic weaknesses. The default is '3des'.
Ciphers
Specifies the ciphers allowed for protocol version 2 in order of preference. Multiple ciphers must be comma-separated. The supported ciphers are '3des-cbc','aes128-cbc', 'aes192-cbc', 'aes256-cbc', 'aes128-ctr', 'aes192-ctr', 'aes256-ctr', 'arcfour128', 'arcfour256', 'arcfour', 'blowfish-cbc',and 'cast128-cbc'. The default is:
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,
aes256-cbc,arcfour
Compression
Specifies whether to use compression. The argument must be 'yes' or 'no'. The default is 'no'.
CompressionLevel
Specifies the compression level to use if compression is enabled. The argument must be an integer from 1 (fast) to 9 (slow, best). The default level is 6,which is good for most applications. The meaning of the values is the same as in gzip(1). Note that this option applies to protocol version 1 only.
ConnectionAttempts
Specifies the number of tries (one per second) to make before exiting. The argument must be an integer. This may be useful in scripts if the connectionsometimes fails. The default is 1.
ConnectTimeout
Specifies the timeout (in seconds) used when connecting to the SSH server, instead of using the default system TCP timeout. This value is used only when thetarget is down or really unreachable, not when it refuses the connection.
ControlMaster
Enables the sharing of multiple sessions over a single network connection. When set to 'yes', ssh(1) will listen for connections on a control socketspecified using the ControlPath argument. Additional sessions can connect to this socket using the same ControlPath with ControlMaster setto 'no' (the default). These sessions will try to reuse the master instance's network connection rather than initiating new ones, but will fall back toconnecting normally if the control socket does not exist, or is not listening.
Setting this to 'ask' will cause ssh to listen for control connections, but require confirmation using the SSH_ASKPASS program before they are accepted(see ssh-add(1) for details). If the ControlPath cannot be opened, ssh will continue without connecting to a master instance.
X11 and ssh-agent(1) forwarding is supported over these multiplexed connections, however the display and agent forwarded will be the one belonging to themaster connection i.e. it is not possible to forward multiple displays or agents.
Two additional options allow for opportunistic multiplexing: try to use a master connection but fall back to creating a new one if one does not alreadyexist. These options are: 'auto' and 'autoask'. The latter requires confirmation like the 'ask' option.
ControlPath
Specify the path to the control socket used for connection sharing as described in the ControlMaster section above or the string 'none' to disableconnection sharing. In the path, '%l' will be substituted by the local host name, '%h' will be substituted by the target host name, '%p' the port, and '%r' bythe remote login username. It is recommended that any ControlPath used for opportunistic connection sharing include at least %h, %p, and %r. Thisensures that shared connections are uniquely identified.
DynamicForward
Specifies that a TCP port on the local machine be forwarded over the secure channel, and the application protocol is then used to determine where to connect tofrom the remote machine.
The argument must be [
bind_address:]port. IPv6 addresses can be specified by enclosing addresses in square brackets or by using an alternative syntax: [
bind_address/]port. By default, the local port is bound in accordance with the GatewayPorts setting. However, an explicit bind_addressmay be used to bind the connection to a specific address. The bind_address of 'localhost' indicates that the listening port be bound for local useonly, while an empty address or '*' indicates that the port should be available from all interfaces.
Currently the SOCKS4 and SOCKS5 protocols are supported, and ssh(1) will act as a SOCKS server. Multiple forwardings may be specified, and additionalforwardings can be given on the command line. Only the superuser can forward privileged ports.
EnableSSHKeysign
Setting this option to 'yes' in the global client configuration file /etc/ssh/ssh_config enables the use of the helper program ssh-keysign(8) duringHostbasedAuthentication. The argument must be 'yes' or 'no'. The default is 'no'. This option should be placed in the non-hostspecific section.See ssh-keysign(8) for more information.
EscapeChar
Sets the escape character (default: '~'). The escape character can also be set on the command line. The argument should be a single character, '^' followed bya letter, or 'none' to disable the escape character entirely (making the connection transparent for binary data).
ExitOnForwardFailure
Specifies whether ssh(1) should terminate the connection if it cannot set up all requested dynamic, tunnel, local, and remote port forwardings. The argumentmust be 'yes' or 'no'. The default is 'no'.
ForwardAgent
Specifies whether the connection to the authentication agent (if any) will be forwarded to the remote machine. The argument must be 'yes' or 'no'. Thedefault is 'no'.
Agent forwarding should be enabled with caution. Users with the ability to bypass file permissions on the remote host (for the agent's Unix-domain socket)can access the local agent through the forwarded connection. An attacker cannot obtain key material from the agent, however they can perform operations on thekeys that enable them to authenticate using the identities loaded into the agent.
ForwardX11
Specifies whether X11 connections will be automatically redirected over the secure channel and DISPLAY set. The argument must be 'yes' or 'no'. The defaultis 'no'.
X11 forwarding should be enabled with caution. Users with the ability to bypass file permissions on the remote host (for the user's X11 authorizationdatabase) can access the local X11 display through the forwarded connection. An attacker may then be able to perform activities such as keystroke monitoring ifthe ForwardX11Trusted option is also enabled.
ForwardX11Trusted
If this option is set to 'yes', remote X11 clients will have full access to the original X11 display.
If this option is set to 'no', remote X11 clients will be considered untrusted and prevented from stealing or tampering with data belonging to trusted X11clients. Furthermore, the xauth(1) token used for the session will be set to expire after 20 minutes. Remote clients will be refused access after this time.
The default is 'no'.
See the X11 SECURITY extension specification for full details on the restrictions imposed on untrusted clients.
GatewayPorts
Specifies whether remote hosts are allowed to connect to local forwarded ports. By default, ssh(1) binds local port forwardings to the loopback address. Thisprevents other remote hosts from connecting to forwarded ports. GatewayPorts can be used to specify that ssh should bind local port forwardings to thewildcard address, thus allowing remote hosts to connect to forwarded ports. The argument must be 'yes' or 'no'. The default is 'no'.
GlobalKnownHostsFile
Specifies a file to use for the global host key database instead of /etc/ssh/ssh_known_hosts.
GSSAPIAuthentication
Specifies whether user authentication based on GSSAPI is allowed. The default is 'no'. Note that this option applies to protocol version 2 only.
GSSAPIKeyExchange
Specifies whether key exchange based on GSSAPI may be used. When using GSSAPI key exchange the server need not have a host key. The default is 'no'. Notethat this option applies to protocol version 2 only.
GSSAPIClientIdentity
If set, specifies the GSSAPI client identity that ssh should use when connecting to the server. The default is unset, which means that the default identitywill be used.
GSSAPIDelegateCredentials
Forward (delegate) credentials to the server. The default is 'no'. Note that this option applies to protocol version 2 connections using GSSAPI.
GSSAPIRenewalForcesRekey
If set to 'yes' then renewal of the client's GSSAPI credentials will force the rekeying of the ssh connection. With a compatible server, this can delegatethe renewed credentials to a session on the server. The default is 'no'.
GSSAPITrustDns
Set to 'yes to indicate that the DNS is trusted to securely canonicalize' the name of the host being connected to. If 'no, the hostname entered on the'command line will be passed untouched to the GSSAPI library. The default is 'no'. This option only applies to protocol version 2 connections using GSSAPI.
HashKnownHosts
Indicates that ssh(1) should hash host names and addresses when they are added to ~/.ssh/known_hosts. These hashed names may be used normally by ssh(1)and sshd(8), but they do not reveal identifying information should the file's contents be disclosed. The default is 'no'. Note that existing names andaddresses in known hosts files will not be converted automatically, but may be manually hashed using ssh-keygen(1).
HostbasedAuthentication
Specifies whether to try rhosts based authentication with public key authentication. The argument must be 'yes' or 'no'. The default is 'no'. This optionapplies to protocol version 2 only and is similar to RhostsRSAAuthentication.
HostKeyAlgorithms
Specifies the protocol version 2 host key algorithms that the client wants to use in order of preference. The default for this option is: 'ssh-rsa,ssh-dss'.
HostKeyAlias
Specifies an alias that should be used instead of the real host name when looking up or saving the host key in the host key database files. This option isuseful for tunneling SSH connections or for multiple servers running on a single host.
HostName
Specifies the real host name to log into. This can be used to specify nicknames or abbreviations for hosts. The default is the name given on the command line.Numeric IP addresses are also permitted (both on the command line and in HostName specifications).
IdentitiesOnly
Specifies that ssh(1) should only use the authentication identity files configured in the ssh_config files, even if ssh-agent(1) offers more identities.The argument to this keyword must be 'yes' or 'no'. This option is intended for situations where ssh-agent offers many different identities. The default is'no'.
Ssh Agents Login
IdentityFile
Specifies a file from which the user's RSA or DSA authentication identity is read. The default is ~/.ssh/identity for protocol version 1, and~/.ssh/id_rsa and ~/.ssh/id_dsa for protocol version 2. Additionally, any identities represented by the authentication agent will be used forauthentication.
The file name may use the tilde syntax to refer to a user's home directory or one of the following escape characters: '%d' (local user's home directory),'%u' (local user name), '%l' (local host name), '%h' (remote host name) or '%r' (remote user name).
It is possible to have multiple identity files specified in configuration files; all these identities will be tried in sequence.
KbdInteractiveAuthentication
Specifies whether to use keyboard-interactive authentication. The argument to this keyword must be 'yes' or 'no'. The default is 'yes'.
KbdInteractiveDevices
Specifies the list of methods to use in keyboard-interactive authentication. Multiple method names must be comma-separated. The default is to use the serverspecified list. The methods available vary depending on what the server supports. For an OpenSSH server, it may be zero or more of: 'bsdauth', 'pam', and'skey'.
LocalCommand
Specifies a command to execute on the local machine after successfully connecting to the server. The command string extends to the end of the line, and isexecuted with the user's shell. The following escape character substitutions will be performed: '%d' (local user's home directory), '%h' (remote host name),'%l' (local host name), '%n' (host name as provided on the command line), '%p' (remote port), '%r' (remote user name) or '%u' (local user name). This directiveis ignored unless PermitLocalCommand has been enabled.
LocalForward
Specifies that a TCP port on the local machine be forwarded over the secure channel to the specified host and port from the remote machine. The first argumentmust be [
bind_address:]port and the second argument must be host:hostport. IPv6 addresses can be specified by enclosing addresses in squarebrackets or by using an alternative syntax: [
bind_address/]port and host/hostport. Multiple forwardings may be specified, and additional forwardings can be given on the commandline. Only the superuser can forward privileged ports. By default, the local port is bound in accordance with the GatewayPorts setting. However, anexplicit bind_address may be used to bind the connection to a specific address. The bind_address of 'localhost' indicates that the listeningport be bound for local use only, while an empty address or '*' indicates that the port should be available from all interfaces.
LogLevel
Gives the verbosity level that is used when logging messages from ssh(1). The possible values are: QUIET, FATAL, ERROR, INFO, VERBOSE, DEBUG, DEBUG1, DEBUG2,and DEBUG3. The default is INFO. DEBUG and DEBUG1 are equivalent. DEBUG2 and DEBUG3 each specify higher levels of verbose output.
MACs' Specifies the MAC (message authentication code) algorithms in order of preference. The MAC algorithm is used in protocol version 2 for dataintegrity protection. Multiple algorithms must be comma-separated. The default is:
hmac-md5,hmac-sha1,umac-64@openssh.com,
hmac-ripemd160,hmac-sha1-96,hmac-md5-96
NumberOfPasswordPrompts
Specifies the number of password prompts before giving up. The argument to this keyword must be an integer. The default is 3.
PasswordAuthentication
Specifies whether to use password authentication. The argument to this keyword must be 'yes' or 'no'. The default is 'yes'.
PermitLocalCommand
Allow local command execution via the LocalCommand option or using the !command escape sequence in ssh(1). The argument must be 'yes' or'no'. The default is 'no'.
Port' Specifies the port number to connect on the remote host. The default is 22.
PreferredAuthentications
Specifies the order in which the client should try protocol 2 authentication methods. This allows a client to prefer one method (e.g.keyboard-interactive) over another method (e.g. password) The default for this option is: '
gssapi-with-mic, hostbased, publickey, keyboard-interactive, password'.
Protocol
Specifies the protocol versions ssh(1) should support in order of preference. The possible values are '1' and '2'. Multiple versions must be comma-separated.The default is '2,1'. This means that ssh tries version 2 and falls back to version 1 if version 2 is not available.
ProxyCommand
Specifies the command to use to connect to the server. The command string extends to the end of the line, and is executed with the user's shell. In the commandstring, '%h' will be substituted by the host name to connect and '%p' by the port. The command can be basically anything, and should read from its standardinput and write to its standard output. It should eventually connect an sshd(8) server running on some machine, or execute sshd -i somewhere. Host keymanagement will be done using the HostName of the host being connected (defaulting to the name typed by the user). Setting the command to 'none' disablesthis option entirely. Note that CheckHostIP is not available for connects with a proxy command.
This directive is useful in conjunction with nc(1) and its proxy support. For example, the following directive would connect via an HTTP proxy at 192.0.2.0:
ProxyCommand /usr/bin/nc -X connect -x 192.0.2.0:8080 %h %p
Specifies whether to try public key authentication. The argument to this keyword must be 'yes' or 'no'. The default is 'yes'. This option applies toprotocol version 2 only.RekeyLimit
Specifies the maximum amount of data that may be transmitted before the session key is renegotiated. The argument is the number of bytes, with an optionalsuffix of 'K', 'M', or 'G' to indicate Kilobytes, Megabytes, or Gigabytes, respectively. The default is between '1G' and '4G', depending on the cipher. Thisoption applies to protocol version 2 only.
RemoteForward
Specifies that a TCP port on the remote machine be forwarded over the secure channel to the specified host and port from the local machine. The first argumentmust be [
bind_address:]port and the second argument must be host:hostport. IPv6 addresses can be specified by enclosing addresses in squarebrackets or by using an alternative syntax: [
bind_address/]port and host/hostport. Multiple forwardings may be specified, and additional forwardings can be given on the commandline. Privileged ports can be forwarded only when logging in as root on the remote machine.
If the port argument is '0', the listen port will be dynamically allocated on the server and reported to the client at run time.
If the bind_address is not specified, the default is to only bind to loopback addresses. If the bind_address is '*' or an empty string, thenthe forwarding is requested to listen on all interfaces. Specifying a remote bind_address will only succeed if the server's GatewayPorts optionis enabled (see sshd_config(5)).
RhostsRSAAuthentication
Specifies whether to try rhosts based authentication with RSA host authentication. The argument must be 'yes' or 'no'. The default is 'no'. This optionapplies to protocol version 1 only and requires ssh(1) to be setuid root.
RSAAuthentication
Specifies whether to try RSA authentication. The argument to this keyword must be 'yes' or 'no'. RSA authentication will only be attempted if the identityfile exists, or an authentication agent is running. The default is 'yes'. Note that this option applies to protocol version 1 only.
Ssh Agent Jenkins
SendEnv
Specifies what variables from the local environ(7) should be sent to the server. Note that environment passing is only supported for protocol 2. The servermust also support it, and the server must be configured to accept these environment variables. Refer to AcceptEnv in sshd_config(5) for how to configurethe server. Variables are specified by name, which may contain wildcard characters. Multiple environment variables may be separated by whitespace or spreadacross multiple SendEnv directives. The default is not to send any environment variables.
See PATTERNS for more information on patterns.
ServerAliveCountMax
Sets the number of server alive messages (see below) which may be sent without ssh(1) receiving any messages back from the server. If this threshold is reachedwhile server alive messages are being sent, ssh will disconnect from the server, terminating the session. It is important to note that the use of server alivemessages is very different from TCPKeepAlive (below). The server alive messages are sent through the encrypted channel and therefore will not bespoofable. The TCP keepalive option enabled by TCPKeepAlive is spoofable. The server alive mechanism is valuable when the client or server depend onknowing when a connection has become inactive.
The default value is 3. If, for example, ServerAliveInterval (see below) is set to 15 and ServerAliveCountMax is left at the default, if theserver becomes unresponsive, ssh will disconnect after approximately 45 seconds. This option applies to protocol version 2 only.
ServerAliveInterval
Sets a timeout interval in seconds after which if no data has been received from the server, ssh(1) will send a message through the encrypted channel torequest a response from the server. The default is 0, indicating that these messages will not be sent to the server. This option applies to protocol version 2only.
SmartcardDevice
Specifies which smartcard device to use. The argument to this keyword is the device ssh(1) should use to communicate with a smartcard used for storing theuser's private RSA key. By default, no device is specified and smartcard support is not activated.
StrictHostKeyChecking
If this flag is set to 'yes', ssh(1) will never automatically add host keys to the ~/.ssh/known_hosts file, and refuses to connect to hosts whose hostkey has changed. This provides maximum protection against trojan horse attacks, though it can be annoying when the /etc/ssh/ssh_known_hosts file ispoorly maintained or when connections to new hosts are frequently made. This option forces the user to manually add all new hosts. If this flag is set to'no', ssh will automatically add new host keys to the user known hosts files. If this flag is set to 'ask', new host keys will be added to the user knownhost files only after the user has confirmed that is what they really want to do, and ssh will refuse to connect to hosts whose host key has changed. The hostkeys of known hosts will be verified automatically in all cases. The argument must be 'yes', 'no', or 'ask'. The default is 'ask'.
TCPKeepAlive
Specifies whether the system should send TCP keepalive messages to the other side. If they are sent, death of the connection or crash of one of the machineswill be properly noticed. However, this means that connections will die if the route is down temporarily, and some people find it annoying.
The default is 'yes' (to send TCP keepalive messages), and the client will notice if the network goes down or the remote host dies. This is important inscripts, and many users want it too.
To disable TCP keepalive messages, the value should be set to 'no'.
Tunnel
Request tun(4) device forwarding between the client and the server. The argument must be 'yes', 'point-to-point' (layer 3), 'ethernet' (layer 2), or'no'. Specifying 'yes' requests the default tunnel mode, which is 'point-to-point'. The default is 'no'.
TunnelDevice
Specifies the tun(4) devices to open on the client (local_tun) and the server (remote_tun).
The argument must be local_tun[:remote_tun]. The devices may be specified by numerical ID or the keyword 'any', which uses the nextavailable tunnel device. If remote_tun is not specified, it defaults to 'any'. The default is 'any:any'.
UsePrivilegedPort
Specifies whether to use a privileged port for outgoing connections. The argument must be 'yes' or 'no'. The default is 'no'. If set to 'yes', ssh(1)must be setuid root. Note that this option must be set to 'yes' for RhostsRSAAuthentication with older servers.
Ssh Agents Near Me
User' Specifies the user to log in as. This can be useful when a different user name is used on different machines. This saves the trouble of havingto remember to give the user name on the command line.
UserKnownHostsFile
Specifies a file to use for the user host key database instead of ~/.ssh/known_hosts.
VerifyHostKeyDNS
Specifies whether to verify the remote key using DNS and SSHFP resource records. If this option is set to 'yes', the client will implicitly trust keys thatmatch a secure fingerprint from DNS. Insecure fingerprints will be handled as if this option was set to 'ask'. If this option is set to 'ask', informationon fingerprint match will be displayed, but the user will still need to confirm new host keys according to the StrictHostKeyChecking option. Theargument must be 'yes', 'no', or 'ask'. The default is 'no'. Note that this option applies to protocol version 2 only.
See also VERIFYING HOST KEYS in ssh(1).
VisualHostKey
If this flag is set to 'yes', an ASCII art representation of the remote host key fingerprint is printed in addition to the hex fingerprint string at loginand for unknown host keys. If this flag is set to 'no', no fingerprint strings are printed at login and only the hex fingerprint string will be printed forunknown host keys. The default is 'no'.
XAuthLocation
Specifies the full pathname of the xauth(1) program. The default is /usr/bin/xauth.
Patterns
A pattern consists of zero or more non-whitespace characters, '*' (a wildcard that matches zero or more characters), or '?' (a wildcard that matchesexactly one character). For example, to specify a set of declarations for any host in the '.co.uk' set of domains, the following pattern could beused:
- Host 192.168.0.?
A pattern-list is a comma-separated list of patterns. Patterns within pattern-lists may be negated by preceding them with an exclamation mark ('!').For example, to allow a key to be used from anywhere within an organisation except from the 'dialup' pool, the following entry (in authorized_keys) could beused:
Files
This is the per-user configuration file. The format of this file is described above. This file is used by the SSH client. Because of the potential forabuse, this file must have strict permissions: read/write for the user, and not accessible by others./etc/ssh/ssh_config
Systemwide configuration file. This file provides defaults for those values that are not specified in the user's configuration file, and for those users who donot have a configuration file. This file must be world-readable.
See Also
ssh(1)
Authors
OpenSSH is a derivative of the original and free ssh 1.2.12 release by Tatu Ylonen. Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo de Raadt andDug Song removed many bugs, re-added newer features and created OpenSSH. Markus Friedl contributed the support for SSH protocol versions 1.5 and 2.0.
BSD April 14, 2013 BSD
Referenced By
brlapi_tty(3),darcs(1),duplicity(1),gsissh(1),gsissh-keysign(8),gsisshd(8),gsisshd_config(5),pssh(1),task-syncSsh Agents
(5)Bitvise SSH Client currently does not implement an authentication agent of its own.
The SSH Client can:
Access client authentication keys provided by Pageant, the PuTTY authentication agent.
Access client authentication keys provided by a Cygwin-based OpenSSH authentication agent.
Forward access to either agent type to server-side software in an SSH terminal session.
To use Bitvise SSH Client with the PuTTY authentication agent, Pageant:
Start Pageant.
Make sure that one or more keys have been added in Pageant.
Run Bitvise SSH Client in any manner.
Observe that Pageant keys are now available in the SSH Client's Client key manager. The SSH Client can use these keys for user authentication.
Server-side software can access Pageant keys inside an SSH terminal shell if you use the setting Enable authentication agent forwarding on the Terminal tab in the main SSH Client window.
Ssh Agent List Keys
If using the command line clients sftpc, stermc, stnlc or sexec:
To use a Pageant key for client authentication, use the command line parameter -pk=t1 for the key in PuTTY slot 1. Similarly, use -pk=t2 for PuTTY slot 2, etc.
Alternately, use -pk=a for any key the server will accept, including keys provided by authentication agents.
With sexec and stermc, to allow server-side software to access the authentication agent, use the command line parameter -agentFwd=y.
Ssh Agent Add Key
To use Bitvise SSH Client with the Cygwin OpenSSH authentication agent, ssh-agent:
Open a Cygwin bash shell.
In the bash shell, run the following to start ssh-agent, add keys to the agent, and start the SSH Client:
eval $(ssh-agent) ssh-add BvSsh
The SSH Client needs to be started in this way because it needs the environment variable SSH_AUTH_SOCK which is created by the eval command.
If the SSH Client is started in a different way, for example by clicking its icon, it will not have access to the environment variables and will not be able to locate the OpenSSH agent.
Observe that OpenSSH keys are now available in the SSH Client's Client key manager. The SSH Client can use these keys for user authentication.
Server-side software can access OpenSSH agent keys inside an SSH terminal shell if you use the setting Enable authentication agent forwarding on the Terminal tab in the main SSH Client window.
What Is Openssh Authentication Agent
If using the command line clients sftpc, stermc, stnlc or sexec:
To use an ssh-agent key for client authentication, use the command line parameter -pk=o1 for the key in OpenSSH slot 1. Similarly, use -pk=o2 for OpenSSH slot 2, etc.
Alternately, use -pk=a for any key the server will accept, including keys provided by authentication agents.
With sexec and stermc, to allow server-side software to access the authentication agent, use the command line parameter -agentFwd=y.
Bitvise SSH Client is currently unable to use the OpenSSH agent that comes with Windows 10. This version of the OpenSSH agent runs under the Windows Subsystem for Linux and uses Unix sockets in a way that's inaccessible to native Windows applications. Since the Windows Subsystem for Linux is still in development, Microsoft might implement changes that could make these Unix sockets accessible for a future SSH Client version.